![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-f1-set/csl-elite-f1-set_manual_3338010036.webp)
36
Activate the Tuning Menu by pressing the Tuning Menu button (see the ‘Hotkeys’
chapter of this user manual). The menu will be shown on the tuning display of
the Fanatec
®
steering wheel. To navigate through the Tuning Menu, use the
directional stick of the Fanatec
®
steering wheel.
Note:
Tuning functions are subject to change and may be altered in future
firmware versions.
7.3.1 S_1 … S_5 (Setups)
Setups range: S_1 ... S_5
Setups default: S_1
The CSL Elite F1® Set provides five different setups to store your adjusted
values independently from each other. To change which setup is active, move
the directional stick of the Fanatec
®
steering wheel up or down.
7.3.2 SEN (Sensitivity)
SEN range: 009 … 108 AUT
SEN default: AUT
The sensitivity defines the steering angle. If SEN is set to 009 the steering
wheel can only be turned 90° (45° to left and 45° to right side direction from cal-
ibrated center position). If SEN is set to 108 the steering wheel can be turned
the mechanical maximum way of 1080° (540° to left and 540° to right side di-
rection from calibrated center position). If SEN is set to AUT the sensitivity is
controlled by the PC* driver (see chapter PC* driver for more details) or by the
game if it supports this feature. To change the active value, move the direction
-
al stick of the Fanatec
®
steering wheel up or down.
7.3.3 FF (Force Feedback)
FF range: OFF 001 … 100
FF default: 100
The Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the CSL Elite F1® Set. If
FF is set to OFF, there will be no force feedback effect executed by the CSL
Elite F1® Set motor. If FF is set to 001, the motor will execute only 1% of the
maximum motor power. If FF is set to 100, the motor will execute 100% of the
maximum motor power. To change the active value, move the directional stick
of the Fanatec
®
steering wheel up or down. ‘It is recommended to run higher
‘FF’ values and lower in-game strength values to avoid force feedback clipping.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.