Faithtech FT68200 Series, Руководство пользователя

Страница: 75 / 89

Faithtech FT68200 Operation Manual
69
Figure 3-39 Time measurement
8. Press to start a time measurement test;
9. After the load detects the complete start signal and end signal, the time
measurement ends, the screen prompts “SUCCESS” and the measured time is
displayed in ms.
Notice: There is no direct relation between the turn-on of time measurement and
load input.
When measuring the external level, there is no need to set the start main value (Beg
LEVL) or the end main value (End LEVL), just select the level direction. The external level
input measurement port is shown in the figure below.
Figure 3-40 Time measurement for external level signal
3.29. Save and Recall
The load provides 20 groups of storage locations for users to save test function
parameters. The configuration parameters of each test function can be saved to the