Faithtech FT68200 Series, Руководство пользователя, Страница: 65 / 89

Faithtech FT68200 Operation Manual
59
I-Set Test current at medium level
Delay The continuous loading time of each current, the range is
0.1
～
60.0 seconds
Notice: It is recommended to configure the load as voltage remote sense when
using load effect test function.
3.23. LED Test
LED simulation test function, mainly used for LED power supply test. The electronic
load is controlled to simulate the voltage and current waveforms of the real LED load.
Before using the LED test function, the user needs to understand the working
characteristics of the LED:
1. The LED is turned on on the condition that the voltage applied across the LED is
greater than a certain value. According to this characteristic, the equivalent circuit of the
LED and the actual working equivalent circuit of multiple LEDs can be obtained.
Figure 3-26 LED Equivalent Circuit