Faithtech FT68200 Series, Руководство пользователя

Страница: 47 / 89

Faithtech FT68200 Operation Manual
41
GPIB Set GPIB communication address
Protocol Optional Modbus or SCPI
Factory
Restore
factory set
Restore to factory set
Others Language
Optional traditional Chinese/Simplified
Chinese/English
Sound Turn on/off key sound
Power Save
Whether to save the input parameter to non-volatile
memory
Shortcut Turn on/off shortcut recall
3.8. Set Menu Configuration
Press (Menu) to go to main menu, select “Set” and press to
display sub menu and details are described as follows.
Menu Set item Function
APG
Sense V-sense function, selectable from local or remote
Response Set constant voltage response speed, optional FAST/SLOW
ADV REG The voltage loop differential adjustment switch in constant voltage
mode, which can increase the response speed of the voltage loop after
it is turned on
ON Input Set to “off”, the input is turned off when power on; when set to “on”
and turn on "Power Save", the load will automatically turn on the input
when power on
APG Turn on/off external analog programming (valid in CCH only)
LoadTime Set continuous loading time, setting range 0
～
999999s
EXT-S Set external control signal behavior, optional Trigger/Toggle/Hold
ShortWay Set “SHORT” key behavior, optional Toggle/Hold
SampRate Voltage and current transmission rate setting, optional 1000Hz, 500Hz,
200Hz, 100Hz, 10Hz
ConstSlew CC mode slew rate enable/disable, when turn on this function, it is
allowed to set slew rate in CC mode
PoweDoub Instantaneous 2 times overpower loading function on/off,
CCSpeed Set current slew rate unit in CC mode, optional A/us and A/ms
SET-AUTO
Volt Con Under the automatic test function, the judgment voltage when the
device under test is connected
Volt Cut Under the automatic test function, the judgment voltage when the
device under test is removed