2
B614
10
732998 - Rev.A_DRAFT
0116
0001
tttttt
tttttt
tttt
tttt
tttttt
tttt
tt
tttttt
tttttt
tttttt
BARRIER B614 230V
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
Tr
ansla
tion of the original instruc
tions
ENGLISH
3.4
EMERGENCY USE
In any case the beam is not behaving properly, in
emergencies or if there is a fault, turn off the electricity
supply to the automation system and disconnect the
buffer batteries if there are any. If the conditions exist
for the manual movement of the beam safely , use the
MANUAL FUNCTION; otherwise keep the automation
out of order until the repair or restoration.
In the case of a breakdown, the automation system
must be reset/repaired exclusively by the INSTALLER/
MAINTENANCE TECHNICIAN.
3.5 PRODUCT IDENTIFICATION
The product is identified by the plate (
2
)
.
3.6
TECHNICAL SPECIFICATIONS
B614 it is an electromechanical barrier with a E614
electronic board fitted. B614 it must be installed on
the specific foundation plate and cemented onto a
plinth
RH/LH barrier
B614 makes it possible to build a right
hand or left hand barrier without modifying the bar-
rier body.
The barrier will be installed with the door towards the
inside of the property.
The barrier is defined by observing it from the door side:
-
RH barrier
(right): the beam closes towards the right
(in a clockwise direction)
-
LH barrier
(left): the beam closes towards the left (in
an anticlockwise direction)
Irreversible system
To allow manual operation, the
release manoeuvre must be performed.
Encoder
B614 is fitted with an encoder. The encoder
constantly detects the precise position of the beam
and makes it possible to manage the end of stroke
and slowing downs stored with the set up.
Anticrushing operation
The encoder allows the board
to create the anticrushing feature:
-
the recognition of an obstacle during closure
causes the manoeuvre to be reversed
-
the recognition of an obstacle during opening
Sale code
Product name
IDENTIFICATION NUMBER
Month/year of prod
progressive number for the
month of production
Example:
made in.
January 2017
progressive:
0001
causes the beam to stop.
Adjustable end of stroke
The barrier is fitted with an
adjustable mechanical end of opening and closing
stroke feature.
Equipment
A rectangular or round beam can be
installed. The components necessary for the instal-
lation and the optional equipment are listed in the
dedicated sections.
Balancing system
The balancing spring must be used
FAAC. The single or double spring depending on the
length and configuration of the installed beam must
be fitted in the definite fitting positions.
!
The balancing system is important for safety reasons
to ensure the stability and control of the beam during
movement and keep it operating properly over time.
Master-Slave Configuration
To install two barriers that
open in opposite directions it is necessary to create
the Master-Slave configuration.
5
Symbols: markings on product
Risk of crushing between the moving parts. Present
on the balancer
Risk of cutting, crushing or shearing of fingers or a
hand between the beam and the barrier body. It must
be placed on the trunk by the installation engineer.
"DANGER OF AUTOMATIC MOVEMENT" (not supplied) It must be
placed on the trunk by the installation engineer.
-
Do not allow children to approach or play in the
area of operation of the automation system.
-
Do not allow the control devices to be used by
anyone who is not specifically authorised and
trained to do so.
-
Do not allow the control devices to be used by
children or persons with mental and physical de-
ficiencies unless they are supervised by an adult
who is responsible for their safety.
!
During manual handling, accompany the beam slowly
for the entire stroke. Do not let the beam travel freely.