B614
9
732998 - Rev.A_DRAFT
Tr
ansla
tion of the original instruc
tions
ENGLISH
3. B614
3.1
INTENDED USE
The B614 barriers are designed for vehicular access
control in residential buildings/apartment complexes.
To move the beam manually, follow the instructions
for manual functioning.
!
Any other use that is not expressly specified in these
instructions is prohibited and could affect the integrity of
the product and/or represent a source of danger.
3.2
LIMITATIONS OF USE
Respect the limits of usage frequency indicated in the
technical specifications.
B614 requires the use of a specific FAAC beam that
conforms with the dimensions indicated in this
manual. Only FAAC accessories indicated in this
manual may be fitted to the beam.
B614 requires the use of a FAAC spring that is adequate
for counterbalancing the weight of the beam and
relative accessories
The presence of even occasional environmental
phenomena such as ice, snow or strong wind may
compromise the proper operation of the automa-
tion, the integrity of the components and become
a potential source of danger (see section
§
Use in an
emergency). The limit of use of B614 in the wind is
grade 10 on the Beaufort Scale (max. speed: 102 km/h).
B614 it has not been designed as a system to keep
intruders out.
Creating the automation requires the installation of
the necessary safety devices chosen by the instal-
lation engineer through the proper checks on the
installation site.
The installation must be visible in daylight and at
night. If it is not, it is necessary to install whatever is
necessary to make the fixed and moving parts visible
(light kit on the beam).
The barriers with exclusively vehicle access control
must fitted with suitable visible signs prohibiting foot
traffic. A separate route for foot traffic outside the
range of the beam must be provided and properly
indicated. If the foot traffic cannot be excluded, the
barrier enters within the scope of the EN 12453 and
EN 12445 standards.
3.3 UNAUTHORISED USE
-
Uses other than the intended use are prohibited.
-
It is prohibited to install the automation system
outside of the limits specified in the Technical Data
and Installation Requirements sections.
-
It is forbidden to use B614 in a constructional
configuration other than the one provided by the
manufacturer.
-
No component part of the product may be modi-
fied.
-
It is prohibited to install the automation system
on escape routes.
-
It is prohibited to install the automation system in
environments in which there is a risk of explosion
and/or fire: the presence of flammable gases or
fumes is a serious safety hazard (the product is not
94/9/EC ATEX certified).
-
It is prohibited to power the system with energy
sources other than those specified.
-
It is prohibited to integrate commercial systems
and/or equipment other than those specified, or
use them for purposes not intended and authorised
by their respective manufacturers.
-
Do not allow water jets of any type or size to come
into direct contact with the actuator.
-
Do not expose the actuator to corrosive chemicals
or atmospheric agents.
-
Do not expose the barrier to direct jets of water of
any type and size.
-
Do not expose the barrier to aggressive chemical
or environmental agents.
-
The barrier may not be used to move moving parts
other than the beams produced by FAAC specified
in this manual.
-
Use to control pedestrian access, bicycle traffic and
the passage of animals is prohibited.
-
Use of the barrier at level crossings is prohibited.
-
Use of the barrier on public thoroughfares is
prohibited.
-
It is prohibited to use and/or install accessories
which have not been specifically approved by
FAAC S.p.A.
-
It is prohibited to use the automation system before
performing commissioning.
-
It is prohibited to use the automation system in the
presence of faults which could compromise safety.
-
It is prohibited to use the automation system with
the fixed and/or mobile guards removed or altered.
-
Do not use the automation system unless the area
of operation is free of persons, animals or objects.
-
Do not enter/remain in the area of operation of the
automation system while it is moving.
-
Do not try to prevent the movement of the auto-
mation system.
-
Do not climb on, hold onto or let yourself be pulled
by the leaf. Do not climb onto the actuator.
-
Do not climb or catch on to the beam or lift yourself
up on it. Do not climb on the barrier cabinet.