F.W. Bell 7030, Инструкция по эксплуатации

Страница: 16 / 126

F.W. BELL Model 7030 Gauss/Tesla Meter Instruction Manual
1-8 Section 1 - Introduction
Raised Lowered
Carrying
GENERAL
DESCRIPTION
(Continued)
Cabinet
The cabinet is equipped with a rotating handle that also serves to
adjust the tilt angle of the instrument. If necessary, the handle is easily
removed with a standard Phillips screwdriver. The rear of the housing
features protruding feet that allow the instrument to be placed down in
a vertical position, without damage to the rear panel.
Figure 1-3
shows the instrument in various positions.
Figure 1-3 Various Positions of Instrument
APPLICATIONS
•
Sorting or performing incoming inspection on permanent magnets,
particularly multi-pole magnets.
•
Testing audio speaker magnet assemblies, electric motor armatures
and stators, transformer lamination stacks, cut toroidal cores, coils
and solenoids.
•
Determining the location of stray fields around medical diagnostic
equipment.
•
Determining sources of electromagnetic interference.
•
Locating flaws in welded joints.
•
Inspection of ferrous materials.
•
3-dimensional field mapping.
•
Inspection of magnetic recording heads.
•
Designing new magnetic assemblies.