Page 70 of 74
7.8.
GATE
7.8.1.
The PUG36 (MODULAR GATE 36”) can be installed to swing either direction.
Determine which side the hinge should be on and the direction the gate should swing
before starting installation (FIG. 7.13).
FIG. 7.13
7.8.2.
Using the rubber mallet, tap in the provided round tube plugs into the tubing ends on
the gate. (FIG. 7.14).
FIG. 7.14
7.8.3.
Position the gate hinge against the vertical handrail post. Position the hinge vertically
so the top of the gate is even with the top of the handrail and so that the edge of the
hinge is flush with the edge of the vertical handrail post. Mark holes with pencil using
the holes in the hinge as a template then drill three 5/16
″
holes through both sides of
the vertical handrail tube (FIG. 7.15). Install fasteners through hinge and vertical
handrail tube and secure as shown (FIG. 7.16).
FIG. 7.15
FIG 7.16
WARNING
INSTALL BOLT FROM
THIS SIDE
DRILL 1/8″ HOLES
1/4″ NUT
1/4″ WASHER
1/4″ X 2″
HEX BOLT
1-
1/2″ DIAMETER
TUBE PLUG
Содержание PATHWAY 3G SS06VP
