Page 55 of 74
5.7.11.
Measure the gap between the long leg of the closure brackets and cut the 1-1/2” x 2”
curb to the measured gap length less 1/8” to account for the threaded inserts which
will be installed after cutting (FIG. 5.23).
5.7.12.
Install 5/16”-18 round threaded inserts into both ends of the cut curb. Use a rubber
mallet or similar tool to fully seat the threaded inserts (FIG. 5.23).
5.7.13.
Using a metal file, smooth all sharp edges from cutting the curb.
5.7.14.
Align the top of the curb with the top of the closure brackets then install 5/16″
-18 x
1″ hex bolts through 5/16” flat washers and through the slot in the long l
eg of the
closure bracket into the threaded insert installed in the previous step then tighten all
fasteners securely (FIG. 5.24).
FIG. 5.23
FIG. 5.24
Содержание PATHWAY 3G SS06VP
