Page 37 of 74
4.9.
45° ANGLE PLATFORM HANDRAILS
4.9.1.
There are two options for 45° Angle Platform handrails, Two-Line and Vertical Pickets.
The platform includes the handrail components needed for the option ordered.
Single-Line and Horizontal Picket handrail options are not available for the 45°
Angle Platform.
4.9.2.
Assembling either 45° Angle Platform Two-Line or Vertical Pickets handrails should be
completed after all ramps and platforms have been set and the ramp handrails
installed. The ramps on both sides of the 45° Angle Platform should be set as close to
the corner pockets on the “long” side of the platform as possible. Refer to the
following steps for Two-Line handrails. Skip to 4.9.15 for Vertical Pickets handrails.
4.9.3.
After installing the ramp handrails, attach two Bolt-On Stub Rails to the ramp handrail
posts on the “short” side of the 45° Angle Platform. Center the large hole in the Bolt-
On Stub Rail over the bolt and washer attaching the lower ramp handrail (or over the
second hole from the top if no rail is present) and secure using a 1/4”-20 x 1” hex
washer head self-drilling screw (FIG. 4.16).
FIG. 4.16
Содержание PATHWAY 3G SS06VP
