EZ-ACCESS Passport PL44SP3651, Руководство по установке

Страница: 47 / 68

Page | 47
13.
OPTIONAL EQUIPMENT – PLATFORM SAFETY PAN WEATHER GUARD
13.1. The platform safety pan weather guard (“weather guard”) installs by clipping it onto the safety pan (FIG. 13.1).
13.2. Begin at the rear (closest to lift) and adjacent to one of the outer carriage arms (FIG. 13.2). Orient the weather
guard with the flap pointing up toward the platform and firmly press onto the outer edge of the safety pan until
fully engaged (FIG. 13.2). If not fully engaged, the weather guard may not hold on the safety pan.
13.3. Continue pressing and forming the weather guard around the edge of the safety pan until it reaches the
carriage arm on the opposite side. Trim off excess and retain (if needed, use trimming to fill the area between
the two inner carriage arms).
13.4. Run the lift up and down a few times to confirm that the weather guard is not interfering with the operation of
the safety pan or contacting the legs.
FIG. 13.1
FIG. 13.2