EZ-ACCESS Passport PL44SP3651, Руководство по установке

Страница: 36 / 68

Page | 36
10.
OPTIONAL EQUIPMENT – TOP LANDING GATE CONNECTOR TO PATHWAY HANDRAIL
10.1. INTRODUCTION
10.1.1. Connector kits are designed to fill the space between the VPL’s top landing gate (“gate”) and
a two-line platform handrail post on a PATHWAY® Modular Access System.
10.1.2. Connectors come in two styles: One for the PATHWAY® system and another for the
PATHWAY® 3G system. Depending on which PATHWAY system you are connecting to, refer
to the appropriate section below.
10.2. INSTALLATION TO PATHWAY
10.2.1. The connector kit (FIG. 10.1) includes two 1- 1/2” diameter handrail tubes, two connec tor
plates, two clamp plates, and attachment hardware (FIG. 10.1). If connecting both gate
posts to platform handrail posts, use two kits.
The 1- 1/2” diameter handrail tubes are sized for large r (6 ’) platforms and are typically
cut to fit others.
10.2.2. Install the PATHWAY platform (per PATHWAY instructions) in the desired location.
10.2.3. Do not install a handrail on the side of the platform where the gate will be installed.
10.2.4. A smooth fascia panel is required to fill the area underneath the gate, between the platform
and the ground.
It is the installer’s responsibility to construct this fascia and confirm it meets applicable
building codes.
FIG. 10.1