Page | 13
5.8.8.
Locate the 5/1
6”
-
18 x 2” hex bolt and locknut before
installing the pivot arm assembly (FIG. 5.4
and FIG. 5.5).
5.8.9.
Slide the pivot arm into the torque tube on the guard ramp until the bolt hole in the torque
tube aligns with the hole in the pivot arm.
There are two bolt holes in the pivot arm. One centers the roller under the guard
ramp activating bar for the straight platform and the other centers the roller under
the guard for the turn platform.
5.8.10.
Secure with 5/16”
-
18 x 2” hex bolt and locknut installed in the orientation show
n (FIG. 5.5).
5.8.11.
Verify that the roller is positioned beneath the guard ramp activating bar.
The roller will contact activating bar when operated. Avoid pinch points!
FIG. 5.5
Содержание Passport PL44SP3651
Страница 27: ...Page 27 FIG 9 1 FIG 9 2 ...
Страница 65: ...Page 65 23 ELECTRICAL DRAWING ...
Страница 66: ...Page 66 WIRING DIAGRAM 44 52 72 120 144 AND 168 PASSPORT LIFT ...
