SMX System MultiMatrix Switcher • SMX Control Software
76
4.
When you are finished assigning icons, click
OK
to close the device window.
To change an icon in an input or output box, drag the new icon to the box. The previous
icon is replaced.
To remove the icon and leave the box empty, drag an empty square from the Devices
window to the box.
Alternatively, you can display the input and output numbers in the boxes. To do this, select
Numbers in I/O Boxes
from the
Preferences
menu.
Managing Ties
The SMX Control window can create, remove, and view input-to-output ties.
To create a tie
•
Click and drag an input box outline over to an output box.
•
If
Hold/Verify Changes
has been selected in the
Preferences
menu, a broken line
connecting the two boxes appears, indicating a pending tie.
NOTE:
If you want to undo the pending tie, click
Cancel
. The broken line
disappears.
Click
Take
to confirm the tie. The broken line becomes solid.
Figure 38.
Completed Ties (Solid) and Pending Ties (Broken Lines)
•
If
Immediate Changes
has been selected from the
Preferences
menu, the tie is made
immediately, a solid line appears, and the
Cancel
and
Take
buttons are not displayed.
