Extron electronics MultiMatrix Switcher, Руководство пользователя

Страница: 30 / 137

SMX System MultiMatrix Switcher • Operation 24
4.
Press and release the desired input button (1-10) to select the plane preset address to
save the current configuration to. The Address, Preset, and Enter buttons flash red.
NOTE:
A preset can be saved to any lit or unlit input button (1 through 10). Only
presets with lit buttons can be recalled. When a preset is saved to a lit
button (already containing a preset), the stored data is overwritten with the
new data. Only one plane preset can be saved to an address at a time.
5. Press and release the Enter button. The plane preset is saved or recalled.
Step 4.
Press and release the desired (unlit or lit) input button 1-10
(here preset 3). The selected button flashes
red .
Enter button also blinks ( red ).
ENTER
Step 5.
Press the Enter button to
save or recall the preset.
All buttons extinguish .
C O N T R O L
PRESET ESC VIEW
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
I/O PLANE SELECT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0
Step 3.
Press desired plane button (here plane 0).
Plane button lights green .
Buttons for any previously saved plane presets light red (here preset 7).
NOTE:
To recall a plane preset, press and release the Preset button.
Select a plane, then press and release a lit preset button.
Figure 21. Saving or Recalling a Plane Preset — an Example
(Steps 3 through 5)
Setting RGB Delay (VGA and RGBHV Boards Only)
NOTE:
This feature is applicable only for VGA and RGBHV boards and can not be set via
the front panel when the SMX is in lock modes 1 or 2.
1.
Press the Esc button to clear all pending changes. The button flashes green once.
2.
Select a
VGA
or
RGBHV
plane.
3.
Press and hold View for 3 seconds. The selected plane button flashes green.
4. Select the output to delay. The button lights.
5.
Using View (
<
) and Esc (
>
), adjust the time duration for the delay (up to 5 seconds
maximum). Each lit input button corresponds to a half-second delay.
NOTE:
No input buttons lit signifies zero delay, 10 buttons lit signifies 5 seconds
delay.