SMX System MultiMatrix Switcher • HTML Configuration and Control
95
a
Mail IP Address field
—
The
Mail IP Address
field displays the IP address of the
mail server that handles the e-mail for the facility.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by dots
(periods). Each field can be numbered from 000 through 255. Leading zeroes, up to
3 digits total per field, are optional. Values of 256 and above are invalid.
b
Domain Name field
—
The
Domain Name
field displays the domain name that the
SMX uses to log on to the e-mail server. Standard domain name conventions (for
example,
) apply.
NOTES:
•
The following characters are invalid or not recommended in the domain
names:
+ ~ , @ = ‘ [ ] { } < > “ ; : | \ ?
and
space
•
The @ character is acceptable only as the lead-in to the domain name
(such as
@folklore.net
).
c
SMTP Authorization Required check box
—
The
SMTP Authorization Required
check box sets the SMX to require SMTP authorization before accepting any e-mail. To
set up this authorization requirement, follow these steps:
1.
To enable the
SMTP Authorization
fields, click the
Edit
button at the right of the
Mail IP Address
field. The
Edit
button changes to
Save
.
2.
Select the
SMTP Authorization Required
check box, located below the
Domain
Name
field. This enables the
User Name
and
Password
fields below the check box.
3.
In the
User Name
and
Password
fields, enter a user name and a password that
senders must enter in order for the SMX to accept their e-mail messages.
For the
User Name
, use any combination of letters, numerals, spaces, and symbols
except the comma (
,
) and the single and double quotation marks (
‘
and
“
). For
the password, you can use all characters except the comma. The user name and
password can each be from 1 to 30 characters.
NOTE:
You must specify both a user name and a password.
4.
Click the
Save
button next to the
Mail IP Address
field to save your user name
and password.
To remove SMTP authorization, click
Edit
, deselect the
SMTP Authorization
Required
check box, then click
Save
.
Email Address Fields
The eight
Email Address
fields identify the e-mail addresses of the personnel to whom the
SMX e-mails notification of its failure and repair status. Standard e-mail address conventions
(
) apply.
The check boxes and drop boxes associated with each address field let you specify criteria
under which the SMX will e-mail the recipients.
Click
Edit
to make changes. Click
Save
to save the changes (see
figure 55
).
•
In the
Missing Input
drop-down list to the left of the address, select the inputs to
monitor for presence or absence of a signal.
•
Check the
Power
box to monitor the power supplies.
•
In the associated
Email Options
drop-down list, select whether the recipient is to be
e-mailed of failures, fixes, both, not notified, or removed from the e-mail list.
