UL Guidelines for Rack Mounted Devices
The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the
SMX device in a rack.
1.
Elevated operating ambient temperature
— If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient temperature. Therefore, install the SMX in an environment
compatible with the maximum ambient temperature (Tma = + 122 ˚F, + 50 ˚C) specified
by Extron.
2.
Reduced air flow
— Install the equipment in a rack so that the amount of air flow
required for safe operation of the equipment is not compromised.
3.
Mechanical loading
— Mount the equipment in the rack so that a hazardous condition
is not achieved due to uneven mechanical loading.
4.
Circuit overloading
— Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have an overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
5.
Reliable earthing (grounding)
— Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections
to the branch circuit (e.g. use of power strips).
Rack Mounting
To rack mount the SMX, use two screws on each end of the switcher to attach it to the rack
(see
figure 71
).
Figure 71.
Mounting the SMX
SMX System MultiMatrix Switcher • Reference Information
126
