Extreme Networks ExtremeWare XOS 11.3, Руководство пользователя

Страница: 627 / 698

Saving Debug Information to the Memory Card
ExtremeWare XOS 11.3 Concepts Guide
627
●
off
—Specifies that saving debug information to the external memory card is disabled. This is the
default behavior.
Copying Debug Information
To save and copy debug information to the specified memory card, use the following command:
save debug tracefiles
Modular Switches Only—After the switch writes a core dump file or other debug information to the
external memory card, and before you can view the contents on the card, you must ensure it is safe to
remove the card from the external compact flash slot on the MSM. Use the
eject memorycard
command to prepare the card for removal. After you issue the
eject memorycard
command, you can
manually remove the card from the external compact flash slot on the MSM am read the data on the
card.
To access and read the data on the card, use a PC with appropriate hardware such as a compact flash
reader/writer and follow the manufacturer’s instructions to access the compact flash card and read the
data.
Managing Files on the External Memory Card—Modular Switches
Only
Using a series of commands, you can manage the files stored on your external memory card. For
example, you can rename or copy a configuration file, display a comprehensive list of the configuration
and policy files, or delete a policy file.
The following sections provide a brief overview of the available commands and describe the following
topics:
●
Displaying Files on page 628
●
Moving or Renaming Files on page 628
●
Copying Files on page 628
●
Deleting Files on page 629
For more detailed information about these commands, see Chapter 4 , “ Managing the ExtremeWare XOS
Software .”
NOTE
Filenames are case-sensitive. For information on filename restrictions, please refer to the specific command in the
ExtremeWare XOS Command Reference Guide .
Displaying Files
To display a list of the files stored on your card, including configuration and policy files, use the
following command:
ls {memorycard}