Extreme Networks ExtremeWare XOS 11.3, Руководство пользователя

Страница: 178 / 698

Power Over Ethernet
ExtremeWare XOS 11.3 Concepts Guide
178
Displaying Port PoE Status
To display the PoE status per port, use the following command:
show inline-power info {detail} ports <port_list>
This command provides the following information:
●
State—Displays the port power state:
■
Disabled
■
Searching
■
Delivering
■
Faulted
■
Disconnected
■
Other
■
Denied
●
PD’s power class—Displays the class type of the connected PD:
■
“-----”: disabled or searching
■
“class0”: class 0 device
■
“class1”: class 1 device
■
“class2”: class 2 device
■
“class3”: class 3 device
■
“class4”: class 4 device
●
Volts—Displays the measured voltage. A value from 0 to 2 is valid for ports that are in a searching
or discovered state.
●
Curr—Displays the measured current, in milliamperes, drawn by the PD.
●
Power—Displays the measured power, in watts, supplied to the PD.
●
Fault—Displays the fault value:
■
None
■
UV/OV fault
■
UV/OV spike
■
Over current
■
Overload
■
Undefined
■
Underload
■
HW fault
■
Discovery resistance fail
■
Operator limit violation
■
Disconnect
■
Discovery resistance, A2D failure
■
Classify, A2D failure
■
Sample, A2D failure
■
Device fault, A2D failure
■
Force on error