Extreme Networks ExtremeWare XOS 11.3, Руководство пользователя

Страница: 535 / 698

RIP Configuration Example
ExtremeWare XOS 11.3 Concepts Guide
535
These commands enable or disable the exporting of static, direct, and OSPF-learned routes into the RIP
domain. You can choose which types of OSPF routes are injected, or you can simply choose
ospf
, which
will inject all learned OSPF routes regardless of type. The default setting is disabled.
RIP Configuration Example
Figure 67 illustrates a BlackDiamond switch that has three VLANs defined as follows:
●
Finance
■
Protocol-sensitive VLAN using the IP protocol.
■
All ports on slots 1 and 3 have been assigned.
■
IP address 192.207.35.1.
●
Personnel
■
Protocol-sensitive VLAN using the IP protocol.
■
All ports on slots 2 and 4 have been assigned.
■
IP address 192.207.36.1.
●
MyCompany
■
Port-based VLAN.
■
All ports on slots 1 through 4 have been assigned.
This example does use protocol-sensitive VLANs that only admit IP packets. This is not a common
requirement for most networks. In most cases, VLANs will admit different types of packets to be
forwarded to the hosts and servers on the network.