Extreme Networks ExtremeWare XOS 11.3, Руководство пользователя

Страница: 102 / 698

Managing the ExtremeWare XOS Software
ExtremeWare XOS 11.3 Concepts Guide
102
For the
memorycard
option, this command removes/deletes an existing file on the external memory
card.
Example
The following example removes the policy file named newpolicy.pol from the system:
rm newpolicy.pol
On a modular switch with an external memory card installed, the following command removes the
policy file named
test.pol from the external memory card:
rm memorycard test.pol
Managing the Configuration File
The configuration is the customized set of parameters that you have selected to run on the switch.
Table 16 describes some of the key areas of configuration file management in ExtremeWare XOS.
Table 16: Configuration file management
Task Behavior
Configuration file database ExtremeWare XOS supports saving a configuration file into any named file and
supports more than two saved configurations.
For example, you can download a configuration file from a network TFTP
server and save that file as primary, secondary, or with a user-defined name.
You also select where to save the configuration: primary or secondary
partition, or another space.
The file names primary and secondary exist for backward compatibility with
ExtremeWare.
Downloading configuration files ExtremeWare XOS uses the
tftp
command to download configuration files to
the switch from the network TFTP server.
For more information about downloading configuration files, see “Using TFTP
to Download the Configuration” on page 603 .
Uploading configuration files ExtremeWare XOS uses the
tftp
command to upload configuration files from
the switch to the network TFTP server.
For more information about uploading configuration files, see “Using TFTP to
Upload the Configuration” on page 603 .
Managing configuration files,
including listing, copying,
deleting, and renaming The following commands allow you to manage configuration files:
•
ls
—Lists all of the configuration files in the system.
•
cp
—Makes a copy of an existing configuration file in the system.
•
rm
—Removes/deletes an existing configuration file from the system.
•
mv
—Renames an existing configuration file.
Configuration file type ExtremeWare XOS configuration files are saved in Extensible Markup
Language (XML) format. Use the
show configuration
command to view
on the CLI your currently running switch configuration.
XML configuration mode Indicated by (xml) at the front of the switch prompt. Do not use. Use the
command
disable xml-mode
to disable this mode.
Displaying configuration files You can also see a complete list of configuration files by entering the ls
command followed by the Tab key.