Extreme Networks ExtremeWare XOS 11.3, Руководство пользователя

Страница: 341 / 698

Secure Socket Layer
ExtremeWare XOS 11.3 Concepts Guide
341
To disable SSL and HTTPS, enter the following command:
disable web https
Creating Certificates and Private Keys
When you generate a certificate, the certificate is stored in the configuration file, and the private key is
stored in the EEPROM. The certificate generated is in PEM format.
To create a self-signed certificate and private key that can be saved in the EEPROM, use the following
command:
configure ssl certificate privkeylen <length> country <code> organization <org_name>
common-name <name>
Make sure to specify the following:
●
Country code (maximum size of 2 characters)
●
Organization name (maximum size of 64 characters)
●
Common name (maximum size of 64)
Any existing certificate and private key is overwritten.
The size of the certificate depends on the RSA key length (
privkeylen
) and the length of the other
parameters (
country
,
organization name
, and so forth) supplied by the user. If the RSA key length is
1024, then the certificate is approximately 1 kb. For an RSA key length of 4096, the certificate length is
approximately 2 kb, and the private key length is approximately 3 kb.
Downloading a Certificate Key from a TFTP Server
You can download a certificate key from files stored in a TFTP server. If the operation is successful, any
existing certificate is overwritten. After a successful download, the software attempts to match the
public key in the certificate against the private key stored. If the private and public keys do not match,
the switch displays a warning message similar to the following:
Warning: The Private Key does
not match with the Public Key in the certificate
. This warning acts as a reminder to also
download the private key.
Downloaded certificates and keys are not saved across switch reboots unless you save your current
switch configuration. Once you issue the
save
command, the downloaded certificate is stored in the
configuration file and the private key is stored in the EEPROM.
To download a certificate key from files stored in a TFTP server, use the following command:
download ssl <ip_address> certificate <cert file>
NOTE
For security measures, you can only download a certificate key in the VR-Mgmt virtual router.
To see whether the private key matches with the public key stored in the certificate, use the following
command:
show ssl