manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 60

 

Getting Started

Altitude 3500 Series Access Point Product Reference Guide

60

the correct country is central to legally operating the access point. Each country has its own 
regulatory restrictions concerning electromagnetic emissions and the maximum RF signal strength 
that can be transmitted. To ensure compliance with national and local laws, be sure to set the 
country accurately. CLI and MIB users cannot configure their access point until a two character 
country code (for example, United Kingdom - gb) is set. Refer to 

“Country Codes” on page 574

 for 

the two-character country codes.

NOTE

The System Name and Country are also configurable within the System Settings screen. Refer to 

“Configuring System Settings” on page 68

 (if necessary) to set a system location and admin email address for 

the access point or to view other default settings.

NOTE

Certain SKUs of access points are country-specific, such as US and Israel. The AP comes with the 

country code set for these countries and cannot be changed by the user.

4

Optionally enter the IP address of the server used to provide system time to the access point within 
the 

Time Server

 field. 

NOTE

DNS names are not supported as a valid IP address. The user is required to enter a numerical IP 

address. 

Once the IP address is entered, the access point’s 

Network Time Protocol (NTP)

 functionality is 

engaged automatically. Refer to the access point

 Product Reference Guide

 for information on defining 

alternate time servers and setting a synchronization interval for the access point to adjust its 
displayed time. Refer to 

“Configuring Network Time Protocol (NTP)” on page 98

 (if necessary) for 

information on setting alternate time servers and setting a synchronization interval for the access 
point to adjust its displayed time.

5

Click the 

WAN

 tab to set a minimum set of parameters for using the WAN interface. 

a

Select the 

Enable WAN Interface

 checkbox to enable a connection between the access point and a 

larger network or outside world through the WAN port. Disable this option to effectively isolate 
the access point’s WAN connection. No connections to a larger network or the Internet will be 
possible. MUs cannot communicate beyond the configured subnets.

b

Select the 

This Interface is a DHCP Client

 checkbox to enable DHCP for the access point’s WAN 

connection. This is useful, if the larger corporate network or

 Internet Service Provider (ISP)

 uses 

DHCP. DHCP is a protocol that includes mechanisms for IP address allocation and delivery of 
host-specific configuration parameters from a DHCP server to a host. Some of these parameters 
are IP address, network mask, and gateway.

NOTE

Extreme Networks recommends that the WAN and LAN ports should not both be configured as DHCP 

clients.

c

Specify an 

IP address 

for the access point’s WAN connection. An IP address uses a series of four 

numbers expressed in dot notation, for example, 190.188.12.1 (no DNS names supported).

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды