Extreme Networks Altitude 3500 Series, Руководство по продукции

Страница: 256 / 594

Monitoring Statistics
Altitude 3500 Series Access Point Product Reference Guide
256
The Known AP Details screen displays the target AP’s MAC address, IP address, radio channel,
number of associated MUs, packet throughput per second, radio type(s), model, firmware version,
ESS and client bridges currently connected to the AP radio. Use this information to determine
whether this AP provides better MU association support than the locating access point or warrants
consideration as a member of a different mesh network.
4
Click the Ping button to display a screen for verifying the link with a highlighted access point.
NOTE
A ping test initiated from the Altitude 35xx Known AP Statistics screen uses WNMP pings. Therefore,
target devices that are not Extreme Networks access points are unable to respond to the ping test.
5 Click the Send Cfg to APs button to send the your access point’s configuration to other access point’s.
The recipient access point must be the same single or dual-radio model as the access point sending
the configuration. The sending and recipient access points must also be running the same major
firmware version.
CAUTION
When using the Send Cfg to APs function to migrate an access point’s configuration to other access
points, it is important to keep in mind mesh network configuration parameters do not get completely sent to
other access points. The Send Cfg to APs function will not send the “auto-select” and “preferred list” settings.
Additionally, LAN1 and LAN2 IP mode settings will only be sent if the sender’s AP mode is DHCP or BOOTP.
The WAN’s IP mode will only be sent if the sender’s IP mode is DHCP.