Extreme Networks Altitude 3500 Series, Руководство по продукции

Страница: 106 / 594

System Configuration
Altitude 3500 Series Access Point Product Reference Guide
106
4 Refer to the Status field to assess the completion of the import/export operation.
CAUTION
If errors occur when importing the configuration file, a parsing message displays defining the line
number where the error occurred. The configuration is still imported, except for the error. Consequently, it is
possible to import an invalid configuration. The user is required to fix the problem and repeat the import
operation until an error-free import takes place.
NOTE
Extreme Networks recommends importing configuration files using the CLI. If errors occur during the
import process, they display all at once and are easier to troubleshoot. The access point GUI displays errors
one at a time, and troubleshooting can be a more time-consuming process.
NOTE
When importing the configuration, a xxxxxbytes loaded status message indicates the file was
downloaded successfully. An Incompatible Hardware Type Error message indicates the configuration was not
applied due to a hardware compatibility issue between the importing and exporting devices.
Status After executing an operation (by clicking any of the buttons
in the window), check the Status field for a progress
indicator and messages about the success or errors in
executing the Import/Export operation. Possible status
messages include:
ambiguous input before marker: line <number >
unknown input before marker: line <number>
ignored input after marker: line <number>
additional input required after marker: line <number>
invalid input length: line < number>
error reading input: line <number>
import file from incompatible hardware type: line <number>
[0] Import operation done
[1] Export operation done
[2] Import operation failed
[3] Export operation failed
[4] File transfer in progress
[5] File transfer failed
[6] File transfer done
Auto cfg update: Error in applying config
Auto cfg update: Error in getting config file
Auto cfg update: Aborting due to fw update failure
The <number> value appearing at the end of some
messages relates to the line of the configuration file where
an error or ambiguous input was detected.