manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 44

 

Hardware Installation

Altitude 3500 Series Access Point Product Reference Guide

44

NOTE

The access point must be mounted with the RJ45 cable connector oriented upwards to ensure proper 

operation.

CAUTION

Do not supply power to the Altitude 3510 until the cabling of the unit is complete.

For standard 48-Volt Power Adapter (Part No. 15728) and line cord installations:

a

Connect RJ-45 Ethernet cable between the network data supply (host) and the Altitude 3510 LAN 
port.

b

Verify the power adapter is correctly rated according the country of operation.

c

Connect the power supply line cord to the power adapter.

d

Attach the power adapter cable into the power connector on the Altitude 3510.

e

Plug the power adapter into an outlet.

NOTE

If the Altitude 3510 is utilizing remote management antennas, a wire cover can be used to provide a 

clean finished look to the installation. Contact Extreme Networks for more information.

9

Verify the behavior of the Altitude 3510 LEDs. For more information, see 

“Altitude 3510 LED 

Indicators” on page 48

.

The Altitude 3510 is ready to configure. For information on an Altitude 3510 default configuration, 
see 

“Getting Started” on page 55

. For specific details on Altitude 3510 system configurations, see 

“System Configuration” on page 67

.

Suspended Ceiling T-Bar Installations

A suspended ceiling mount requires holding the Altitude 3510 up against the T-bar of a suspended 
ceiling grid and twisting the Altitude 3510 chassis onto the T-bar.

The mounting hardware and tools (customer provided) required to install the Altitude 3510 on a ceiling 
T-bar consists of:

●

Safety wire (recommended) 

●

Security cable (optional)

To install the Altitude 3510 on a ceiling T-bar:

1

If required, loop a safety wire—with a diameter of at least 1.01 mm (.04 in.), but no more than 0.158 
mm (.0625 in.)—through the tie post (above the Altitude 3510’s console connector) and secure the 
loop.

2

If required, install and attach a security cable to the Altitude 3510 lock port.

3

Attach the radio antennas to their correct connectors. 

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды