manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 579

 

Altitude 3500 Series Access Point Product Reference Guide

579

●

Obtains and applies the expected IP Address from the DHCP Server

●

Downloads both the firmware and configuration files from the TFTP Server and updates both as 
needed. Verify the file versions within the 

System Settings

 screen. 

NOTE

If the firmware files are the same, the firmware will not get updated. If the configuration file name matches 

the last used configuration file on the access point or if the configuration file versions are the same, the access 
point configuration will not get updated.

Global Options—Using Extended/Standard Options

The following are instructions for automatic firmware and configuration file updates via DHCP using 
extended options or standard options configured globally. 

The setup example described in this section includes:

●

1 Altitude 3510 or Altitude 3550 model access point

●

1 Microsoft Windows DHCP Server

●

1 TFTP Server.

To configure Global options using extended/standard options:

1

Set the Windows DHCP Server and access point on the same Ethernet segment.

2

Configure the Windows based DHCP Server as follows:

a

Highlight the Server Domain Name (for example, apfw.extremenetworks.com). From the 

Action

 

menu, select 

Set Predefined Options.

b

Add the following 3 new options under 

DHCP Standard Options

 class:

NOTE

If using Standard Options and the configuration of the access point needs to be changed, use option 

129 or 188 as specified in the Extended Options table. Standard options 66 and 67 are already present in the 
DHCP Standard Options Class by default.

c

Highlight 

Scope Options

 and select 

Configure Options

.

Extended Options

Code

Data type

Access point TFTP Server IP 
Address
(Note: Use any one option)

181
186

IP address
String

Access point Firmware File Name 187

String

Access point Config File Name
(Note: Use any one option)

129
188

String
String

Standard Options

Code

Data type

Access point TFTP Server IP 
Address 

66 

String

Access point Firmware File Name 67

String

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды