manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 220

 

Configuring Access Point Security

Altitude 3500 Series Access Point Product Reference Guide

220

WARNING!

If you have imported a Server or CA certificate, the certificate will not be saved when updating the 

access point’s firmware. Export your certificates before upgrading the access point’s firmware. From the access 
point CLI, use the admin(system.cmgr)> expcert command to export the certificate to a secure location.

4

Use the Radius Client Authentication table to configure multiple shared secrets based on the subnet 
or host attempting to authenticate with the RADIUS server. Use the 

Add 

button to add entries to the 

list. Modify the following information as needed within the table.

5

Click 

Apply 

to save any changes to the RADIUS Server screen. Navigating away from the screen 

without clicking Apply results in all changes to the screen being lost.

6

Click 

Undo Changes

 (if necessary) to undo any changes made. Undo Changes reverts the settings 

displayed on the RADIUS Server screen to the last saved configuration.

7

Click 

Logout 

to securely exit the Access Point applet. A prompt displays confirming the logout before 

the applet is closed.

Configuring LDAP Authentication

When the RADIUS Data Source is set to use an external LDAP server (see 

“Configuring the Radius 

Server” on page 217

), the 

LDAP

 screen is used to configure the properties of the external LDAP server.

To configure the LDAP server:

1

Select 

System Configuration

 > 

User Authentication 

> 

Radius Server

 >

 LDAP

 from the menu tree.

NOTE

For the onboard RADIUS server to work with Windows Active Directory or open LDAP as the database, 

the user has to be present in a group within the organizational unit. The same group must be present within the 
onboard RADIUS server’s database. The group configured within the onboard RADIUS server is used for group 
policy configuration to support a new Time Based Rule restriction feature. 

NOTE

The LDAP screen displays with unfamiliar alphanumeric characters (if new to LDAP configuration). 

Extreme Networks recommends only qualified administrators change the default values within the LDAP screen.

Subnet/Host

Defines the IP address of the subnet or host that will be 
authenticating with the RADIUS server. If a WLAN has 
been created to support mesh networking, then enter the 
IP address of mesh client bridge in order for the MU to 
authenticate with a base bridge.

Netmask

Defines the netmask (subnet mask) of the subnet or host 
authenticating with the RADIUS server.

Shared Secret

Click the Passwords button and set a shared secret used 
for each host or subnet authenticating against the RADIUS 
server. The shared secret can be up to 7 characters in 
length.

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды