manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 48

 

Hardware Installation

Altitude 3500 Series Access Point Product Reference Guide

48

Radio models, a single dot on the antenna connector indicates the primary antenna for Radio 1, and two dots 
designate the secondary antenna for Radio 1.

13

Attach safety wire (if used) to the Altitude 3510 safety wire tie point or security cable (if used) to the 
Altitude 3510’s lock port.

14

Align the ceiling tile into its former ceiling space.

15

Cable the Altitude 3510 using an approved line cord and power supply.

CAUTION

Do not supply power to the Altitude 3510 until the cabling of the unit is complete.

For standard 48-Volt Power Adapter (Part No. 15728) and line cord installations:

a

Connect an RJ-45 Ethernet cable between the network data supply (host) and the Altitude 3510 
LAN port.

b

Verify the power adapter is correctly rated according the country of operation.

c

Connect the power supply line cord to the power adapter.

d

Attach the power adapter cable into the power connector on the Altitude 3510.

e

Plug the power adapter into an outlet.

16

Verify the behavior of the Altitude 3510 LED lightpipe. For more information, see 

“Altitude 3510 

LED Indicators” on page 48

.

17

Place the ceiling tile back in its frame and verify it is secure.

The Altitude 3510 is ready to configure. For information on an Altitude 3510 default configuration, 
see 

“Getting Started” on page 55

. For specific details on Altitude 3510 system configurations, see 

“System Configuration” on page 67

.

Altitude 3510 LED Indicators

The Altitude 3510 utilizes seven LED indicators. Five LEDs display within four LED slots on the front of 
the Altitude 3510 (on top of the Altitude 3510 housing) and two LEDs (for above the ceiling 
installations) are located on the back of the device (the side containing the LAN, WAN and antenna 
connectors).

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды