manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 187

 

Altitude 3500 Series Access Point Product Reference Guide

187

6

Configure the 

Key Settings

 area as needed to set an ASCII Passphrase and 128-bit key.

Default (hexadecimal) 256-bit keys for WP2A/CCMP include:

●

1011121314151617

●

18191A1B1C1D1E1F

●

2021222324252627

●

28292A2B2C2D2E2F

7

Configure the 

WPA2-CCMP Mixed Mode 

field as needed to allow WPA and WPA2 TKIP client 

interoperation.

8

Configure the 

Fast Roaming (802.1x only) 

field as required to enable additional Altitude 35xx roaming 

and key caching options. This feature is applicable only when using 802.1x EAP authentication with 
WPA2/CCMP.

NOTE

PMK key caching is enabled internally by default when 802.1x EAP authentication is enabled.

9

Click the 

Apply 

button to save any changes made within this New Security Policy screen.

10

Click the 

Cancel 

button to undo any changes made within the WPA2/CCMP Settings field and return 

to the 

WLAN 

screen. This reverts all settings to the last saved configuration.

ASCII Passphrase 

To use an ASCII passphrase (and not a hexadecimal 
value), select the checkbox enter an alphanumeric string of 
8 to 63 characters. The string allows character spaces. 
The Altitude 35xx converts the string to a numeric value. 
This passphrase saves the administrator from entering the 
256-bit key each time keys are generated.

256-bit Key

To use a hexadecimal value (and not an ASCII 
passphrase), select the checkbox and enter 16 
hexadecimal characters into each of the four fields 
displayed.

Allow 
WPA/WPA2-TKIP 
clients

WPA2-CCMP Mixed Mode enables WPA2-CCMP, WPA-
TKIP and WPA2-TKIP clients to operate together on the 
network. Enabling this option allows backwards 
compatibility for clients that support WPA-TKIP and WPA2-
TKIP but do not support WPA2-CCMP. Extreme Networks 
recommends enabling this feature if WPA-TKIP or 
WPA2-TKIP supported MUs operate within a WLAN 
populated by WPA2-CCMP enabled clients.

Pre-Authentication

Selecting this option enables an associated MU to carry 
out an 802.1x authentication with another Altitude 35xx 
before it roams to it. The Altitude 35xx caches the keying 
information of the client until it roams to the other Altitude 
35xx. This enables the roaming client to start sending and 
receiving data sooner by not having to do 802.1x 
authentication after it roams. This feature is only supported 
when 802.1x EAP authentication is enabled. 

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды