manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Руководство по продукции

Поделиться
Скачать
Extreme Networks Altitude 3500 Series Скачать руководство пользователя страница 131

 

Altitude 3500 Series Access Point Product Reference Guide

131

4

Configure the 

Port Forwarding 

screen to modify the following:

5

Click 

OK 

to return to the NAT screen. Within the NAT screen, click 

Apply 

to save any changes made 

on the Port Forwarding screen.

6

Click

 Cancel 

to undo any changes made on Port Forwarding screen. This reverts all settings for the 

Port Forwarding screen to the last saved configuration.

Add

Click 

Add 

to create a local map that includes the name, 

transport protocol, start port, end port, IP address and 
Translation Port for incoming packets.

Delete

Click 

Delete

 to remove a selected local map entry.

Name

Enter a name for the service being forwarded. The name 
can be any alphanumeric string and is used for 
identification of the service.

Transport

Use the 

Transport 

pull-down menu to specify the transport 

protocol used in this service. The choices are 

ALL

, 

TCP,

 

UDP

, 

ICMP

, 

AH

, 

ESP,

 and 

GRE. 

Start Port and End 
Port

Enter the port or ports used by the port forwarding service. 
To specify a single port, enter the port number in the 

Start 

Port 

area. To specify a range of ports, use both the 

Start 

Port 

and 

End Port

 options to enter the port numbers. For 

example, enter 110 in the Start Port field and 115 in the 
End Port field.

IP Address

Enter the numerical (non DNS name) IP address to which 
the specified service is forwarded. This address must be 
within the specified NAT range for the associated WAN IP 
address.

Translation Port

Specify the port number used to translate data for the 
service being forwarded.

Forward all 
unspecified ports to

Use the 

Forward all unspecified ports to 

checkbox to 

enable port forwarding for incoming packets with 
unspecified ports. In the adjacent area, enter a target 
forwarding IP address for incoming packets. This number 
must be within the specified NAT range for the associated 
WAN IP address.

Содержание Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды