Exlar Tritex, Руководство по установке

Страница: 37 / 134

Tritex 1 Installation and Setup
37
09/27/12
PN: 27666 Exlar Corporation
Rev. M 952-500-6200M
M23 I/O
M23 Power Connector
Communications
Connector
PCI-TRA-01
PCI-TRA-02
Remote Tritex
Drive
TRA-500-I
M23 Motor
Connector
Tritex Configurations
The models TLM, RTM & RTG include the drive and motion controller integrated into the rear of
actuator. Various power and I/O connections are available. With M23 connectors (shown
below), embedded flying leads, embedded leads with M23 connectors on the end. See ordering
section for model mask information.
TLM 30 with M23 connectors, Connector Option I
The Models TSM, RSM & RSG are designed to be used with the remote Tritex drive and motion
controller, model TRA500, the two are connected via a 1 or 2 meter cable. The TRA500 always
comes with an M23 connection to the actuator. The actuators are available with the motor
power and feedback cable embedded into the actuator with an M23 connector on the drive end
of 1 or 2 meter cable or with the M23 connector mounted directly on the actuator (as shown
below). In the later case, a PCI-TRA-01 or PCI-TRA-02 cable is used to connect the actuator to
the TRA500.
TSM 20 with M23 connector and TRA500 with M23 connectors
The TRA 500 is available with several connector options for power and I/O.
M23 I/O
Communications
Connector
M23 Power