Exlar Tritex, Руководство по установке

Страница: 4 / 134

Tritex 1 Installation and Setup
4
09/27/12
PN: 27666 Exlar Corporation
Rev. M 952-500-6200M
Safety Considerations
As with any electro-mechanical device, safety must be considered during the installation and
operation of your Tritex Series actuator. Throughout this manual you will see paragraphs
marked with CAUTION and WARNING signs as shown below
“Warning” indicates the information following is essential to avoiding a safety hazard.
“Caution” indicates the information following is necessary for avoiding a risk of damage
to the product or other equipment.
General
Failure to follow safe installation guidelines can cause death or serious injury. The voltages
used in the product can cause severe electric shock and/or burns and could be lethal.
Extreme care is necessary at all times when working with or adjacent to the product. The
installation must comply with all relevant safety legislation in the country of use. The forces
created by actuator could be lethal or cause severe injury if proper protection is not provided to
keep personnel away from moving components.
System Design and safety for personnel
The actuator is intended as a component for professional incorporation into complete
equipment or a system. If installed incorrectly, the actuator may present a safety hazard.
The actuator uses high voltages and currents, carries a high level of stored electrical energy,
and is used to control equipment which can cause injury. Close attention is required to the
electrical installation and the system design to avoid hazards either in normal operation or in the
event of equipment malfunction. System design, installation, commissioning and maintenance
must be carried out by personnel who have the necessary training and experience. They must
read this safety information and this manual carefully.
None of the functions or features of
the Tritex actuator may be used to ensure safety of personnel, i.e. they must not be used
for safety-related functions.
Careful consideration must be given to the functions of the
actuator which might result in a hazard, either through their intended behavior or through
incorrect operation due to a fault. In any application where a malfunction of the actuator or its
control system could lead to or allow damage, loss or injury, a risk analysis must be carried out,
and where necessary, further measures taken to reduce the risk- for example a failsafe brake in
case of loss of actuator braking power.
Never attempt to connect or disconnect the actuator with power applied. Dangerous
voltages are present. Damage to equipment and injury to personnel can result. Many
amplifiers have voltage present for a considerable time period after incoming power
is removed. Take care to insure that the amplifier has discharged all power.
In a domestic environment this product may cause radio interference, in which case
supplementary mitigation measures may be required.
WARNING
CAUTION
WARNING
WARNING
WARNING
WARNING