Excelsior-HENDERSON Super X 1999, Руководство пользователя

Страница: 8 / 45

Vehicle Setup
6999-0006 Rev. A
1-5
Sidestand
1. Make sure the sidestand locks in the extended (down)
position, holds firmly in the stored (up) position and moves
freely between both positions.
2. Set the sidestand in the extended position. Turn the
handle bars fully to the left. Lean the motorcycle to the left
until the sidestand is in the locked and parked position.
(StepCaptionHold) “For demonstration only”
(StepCaptionHold) “These are BLIND (white text) 1. STORED (UP) POSITION 2. EXTENDED (DOWN)
POSITION
Battery
The battery is supplied dry. It must be filled and properly
charged before it is put into service. Do not fill the battery with
electrolyte until it is to be placed into service.
We recommended you have fully charged batteries on hand
since it requires approximately 16 hours to fully charge a
battery. If you do not have charged batteries on hand, start
charging the battery as soon as possible.
WARNING
• ACID IS POISONOUS
– Contains sulfuric acid. Ventilate the area when filling
or charging batteries.
• ACID CAN CAUSE SEVERE BURNS
– Shield eyes, protect skin and clothing when handling
acid or working near any batteries.
• Keep sparks and open flames away from batteries during
filling or charging.
Antidote:
• EXTERNAL - Flush with water.
• INTERNAL - Drink large quantities of water or milk.
Follow with milk of magnesia, beaten eggs, or vegetable
oil and get prompt medical attention.
• EYES - Flush with water for 15 minutes and get prompt
medical attention.
Fill Battery
1. Place the battery on a level surface.
2. Remove the sealing strip from the battery filler ports.
3. Remove the electrolyte container from the protective vinyl
bag.
4. Detach the cap strip from the container and save it. The
cap strip will be used to plug the battery filler ports after the
battery is filled.
1. SEALING STRIP
2. ELECTROLYTE
CONTAINER
3. CAP STRIP
10517
10518
10519