Vehicle Setup
6999-0006 Rev. A
1-11
Adjust Throttle Freeplay
1.
Slide the rubber covers off both cable adjusters, and
loosen both adjuster jam nuts.
2.
Turn both cable adjusters into the cable as far as
possible.
3.
Turn the cable adjuster on the throttle opening cable out
until the throttle freeplay is between 1/16” and 3/16”.
4.
Hold the throttle control grip at the fully closed position
and turn the cable adjuster on the throttle closing cable out
until resistance is felt.
5.
Tighten the adjuster jam nuts on both cables, and
reinstall both rubber covers.
1. RUBBER COVER
2. ADJUSTER JAM NUT
3. CABLE ADJUSTER
1. RUBBER COVER
2. ADJUSTER JAM NUT
3. CABLE ADJUSTER
4. OPENING CABLE
5. CLOSING CABLE
Front Brake
1.
Inspect all hoses and hose connections for dampness or
stains from leaking or dried hydraulic fluid.
2.
Bring the motorcycle to an upright position. Turn the
handlebars until the reservoir is horizontal.
3.
The fluid should be clear and at a level above the “Lower”
marking on the reservoir. Add hydraulic fluid if necessary,
(see Adding Hydraulic Fluid page 1-13)
.
1. LOWER MARK
4.
Squeeze the front brake lever toward the handlebar and
release it. It should move freely and smoothly and should
return to its rest position quickly when released. You should
feel a firm resistance in the lever within 3/4” of lever travel. If
the brake lever does not function as described,
see the
motorcycle’s Service Handbook.
10546
10547
10548
10549
Содержание Super X 1999
Страница 36: ...Vehicle Setup 6999 0006 Rev A 1 33 NOTES...
Страница 37: ...2 0 6999 0006 Rev A Owner Predelivery 2 NOTES...
Страница 45: ...2 8 6999 0006 Rev A Owner Predelivery NOTES...
