Excelsior-HENDERSON Super X 1999, Руководство пользователя

Страница: 5 / 45

1-2
6999-0006 Rev. A
Vehicle Setup
General Information
Damage to the motorcycle can occur from the time the motorcycle leaves the factory until it is delivered. Excelsior-
Henderson wants to help you protect your investment and smooth out any bumps in the road. Please pay special
attention to the following general information.
Moving the Crate
The Excelsior-Henderson motorcycle shipping crate is designed to be lifted from a truck or trailer by fork lift from the
end marked “Fork This End” only. Once removed from the truck or trailer, the crate may be lifted by fork lift from either
side or the end marked “Fork This End”.
Signing the Bill Of Lading
Open each packing crate and inspect the motorcycle(s) in the presence of the delivery driver before the delivery
vehicle leaves your Dealership.
Notice
• The Carrier’s responsibility ends when the Bill of Lading is signed.
• Claims against the carrier must be filed at the time of delivery.
Replacement Parts
Replace any items that may have been damaged during shipment or setup with Genuine Excelsior-Henderson
replacement parts only.
Modifications
WARNING
• Do not disable or alter the exhaust, evaporative, or fuel systems on the motorcycle to circumvent federal, state
or local regulations. Environmental and safety systems or devices must be left intact as designed and
manufactured. Changes to the exhaust, evaporative, or fuel systems may void the motorcycles warranty.
• Do not modify the automatic headlight “ON” feature of the motorcycle. Any deliberate action to disable or alter
this system may contribute to an accident and result in personal injury.
Fastener Information
When performing the different setup procedures, keep an eye out for loose or missing fasteners.
If it becomes necessary to retighten a fastener (see Torque Specifications page 1-32).
Notice
• All fasteners come tightened to the correct torque from the factory. If you do not see a problem with a
fastener, it should not be disturbed.
• Some Genuine Excelsior-Henderson threaded fasteners are coated with a thread-locking patch. After remov-
ing and reinstalling the fastener 2 or 3 times, the thread-locking patch wears away and the fastener should be
replaced with the same genuine Excelsior-Henderson fastener.
Dealer Installed Accessories
For model year 1999, all Excelsior-Henderson accessories installed by the Dealer at the time of vehicle delivery are
warranted for 12 months. Excelsior-Henderson accessories installed by the Owner at any time, or those installed by
the Dealer after vehicle delivery are warranted for 90 days.
Special Tools
Rear wheel alignment gauge - - - - Part No. EH-6999-0037
Belt tension gauge - - - - - - - - - Part No. EH-6999-0038
Rear shock adjusting wrench - - - - Part No. EH-6999-0029