Excelsior-HENDERSON Super X 1999, Руководство пользователя

Страница: 19 / 45

1-16
6999-0006 Rev. A
Vehicle Setup
5. Recheck drive belt tension, and install a new rear axle
cotter pin.
WARNING
Do not reuse a cotter pin because it may fail, causing
the wheel to loosen and the rider to lose control of the
motorcycle.
1. COTTER PIN
Engine Oil
The motorcycle comes from the factory filled with the correct
amount of 15W-40 mineral based break-in oil. No additional
oil should be required for starting and road testing the
motorcycle.
The oil level should be checked while the engine is at it’s
normal operating temperature. Since you will be road testing
the motorcycle later in the vehicle setup (consequently
heating the engine to normal operating temperature)
instructions for checking the oil level follow the Road Test.
Low Fuel Indicator
Check the low fuel indicator before filling the
motorcycle with fuel. There must be less than 1 gallon
of fuel in the tank to actuate the low fuel indicator.
1. Insert the key into the main switch and turn the key to the
unlocked (horizontal) position and remove the key.
2. Turn the main switch to the Acc (Accessories) position.
The low fuel level indicator should illuminate.
3. Turn the main switch to the Off position.
1. UNLOCKED 2. LOW FUEL INDICATOR
10555
10560
10561