Excelsior-HENDERSON Super X 1999, Руководство пользователя

Страница: 21 / 45

1-18
6999-0006 Rev. A
Vehicle Setup
Electrical Components
Main Switch
1. Insert the key into the main switch and turn the key to the
locked (vertical) position and remove the key.
2. Move the indicator to the On, Acc, and Off positions. All
electrical circuits should remain inactive during this operation.
1. LOCKED 2. INDICATOR
3. Insert the key into the main switch and turn the key to the
unlocked (horizontal) position and remove the key.
4. With the main switch unlocked and in the Off position, all
electrical circuits should be inactive.
5. Turn the indicator to the Acc position. When the main
switch is unlocked and in the Acc position, all lighting circuits
are energized. You can activate all switch and
button-operated controls except the electric starter button.
1. UNLOCKED
2. OFF POSITION 3. ACC POSITION
6. Turn the indicator to the On position. When the main
switch is unlocked and in the On position, all electrical circuits
are energized including the electric starter button.
Caution
Do not start the engine until all the electrical
components have been checked.
1. ON POSITION
Indicator Lights
There are six indicator lights on the speedometer face.
Check Engine Indicator
1. With the main switch unlocked, turn it to the On
position. Set the engine stop/run switch on the right
handlebar controls to the Run position. The check
engine indicator should illuminate.
2. Set the engine stop/run switch to the Stop position, and
turn the main switch to the Acc position.
1. CHECK ENGINE INDICATOR
10530
10531
10532
10565