DEPOLOX® 5 E flow cell
2. Safety
7
EN
IT security
The manufacturer offers IT security mecha-
nisms for its products to support secure sys-
tem operation. We recommend checking on a
regular basis to see what information is availa-
ble regarding IT security developments for
your products. Information on this can be
found on the Internet.
For the safe operation of an installation, it is
furthermore necessary to integrate the auto-
mation components into a holistic IT security
concept which comprises the entire system
and is in accordance with latest state of the art
technology. In the process, implemented pro-
ducts deriving from other manufacturers
should be taken into account.
Disposal
Ensure safe and environment-friendly disposal
of agents and replaced parts. Dispose of the
electronics waste in accordance with valid
local and national regulations.
2.3
Specific operating phases
•
Never employ any working methods
which could affect safety!
•
Never operated with flammable liquids.
•
The flow cell may only be operated with
the housing closed!
•
Inspect the flow cell at least once daily for
externally visible damage and faults!
Inform the responsible person/authority
immediately of any detected changes
(including any changes in the operating
performance)!
•
Have malfunctions remedied immedia-
tely!
•
During installation and maintenance
work, secure the flow cell against being
switched back on!
•
If stipulated, disconnect all parts from the
power supply before performing any
inspection, maintenance or repair work.
Then first test the disconnected compo-
nents to ensure they do not carry any vol-
tage.
•
Never use corrosive cleaning agents (e.g.
spirit, scouring agents)!
2.4
Warranty conditions
The following must be observed for compli-
ance with warranty conditions. If any of the
conditions are not met, the warranty is void.
•
Installation and commissioning by the
manufacturer or trained and authorized
specialist personnel, e.g. from contracted
companies.
•
Intended use
•
Observation of the operational parame-
ters and settings.
•
The unit may only be operated by trained
personnel.
•
An operating log book must be kept (only
in the public sector).
•
Only approved calibration chemicals may
be used.
•
The unit must not be exposed to frost.
•
The prescribed maintenance work must
be carried out.
•
Use of original spare parts.
2.5
Exclusion of liability
We are not liable for any damages incurred
during installation or use of these hardware
and software components. This applies speci-
fically to trouble-free interaction with the
software and hardware components you
choose.
We accept no liability for any loss sustained by
the buyer (in particular, lost profits, lost infor-
mation and service interruptions) arising
through the use of the flow cell nor for other
damage. You are solely responsible for the ins-
tallation!
The content of the instruction manual has
been checked to make sure that it matches
the hardware and software described. Never-
theless, deviations cannot be ruled out, and
we therefore assume no liability for full con-
formity. The details in this instruction manual
are checked regularly and any necessary cor-
rections included in subsequent issues.
