2. Safety
DEPOLOX® 5 E flow cell
6
EN
2.
Safety
2.1
Intended use
The DEPOLOX® 5 E flow cell (module type
D01) in combination with the installed sensors
and the 700 P electronics module (module
type E01) or 700 M electronics module
(module type E01) is intended only for measu-
rement and control in the treatment of drin-
king water, process water, industrial water,
wastewater, and swimming and bathing pool
water.
The operational safety of DEPOLOX® 5 E flow
cell is guaranteed only if it is used in accor-
dance with its intended application. It may
only be used for the purpose defined in the
order and under the installation, operating
and ambient conditions specified in this inst-
ruction manual.
All inspection and maintenance work must be
carried out in accordance at the specified
intervals.
Compliance with the intended use also inclu-
des reading this instruction manual and obser-
ving all the instructions it contains.
The operator bears full and sole responsibility
if this unit is put to any use which does not
comply strictly and exclusively with this inten-
ded use.
2.2
General safety instructions
The manufacturer places great value upon
safety when working with the unit. This was
already taken into account in the design of the
system, by the integration of safety features.
Safety regulations
The safety instructions in this documentation
must be observed. Additional industry-wide or
in-house safety regulations also continue to
apply.
Safety warnings on the unit
All safety instructions attached to the unit
itself must be observed. These instructions
must always be clearly legible and complete.
State-of-the-art technology
The unit has been constructed in accordance
with state-of-the-art technology and the
accepted safety regulations. However, if the
unit is used by persons who have not been
adequately instructed, risks to life and limb of
such persons or third parties and damage to
the unit itself or to other property cannot be
ruled out. Work not described in this instruc-
tion manual must be performed only by aut-
horized personnel.
Personnel
The operator of the overall system must
ensure that only authorized and qualified spe-
cialized personnel are permitted to work with
and on the unit within their defined scope of
authority. "Authorized, specialized personnel"
refers to trained technicians employed by the
operator, the manufacturer, or, if applicable,
the service partner. Only qualified electricians
must perform work on electrical components.
Spare parts / components
Trouble-free operation of the unit is only gua-
ranteed if original spare parts and compo-
nents are used in precisely the combination
described in this instruction manual. Failure to
observe this instruction may incur the risk of
malfunction or damage to the unit.
Extensions and conversions
Never attempt to perform any modifications,
extensions or conver-sions on the unit that
could have an adverse affect on safety with-
out the written approval of the manufacturer.
Electrical power
Only qualified electricians or trained person-
nel supervised by a qualified electrician are
permitted to perform any work on electrical
components and must do so in accordance
with valid electro-technical regulations.
During normal operation, the controller must
remain closed. Connect power cables in accor-
dance with the wiring diagram.
DANGER
Risk of injury or death!
The DEPOLOX® 5 E flow cell must not be
used with flammable liquids.
DANGER
Risk of injury or death!
External voltages can be connected even
with the operating voltage switched off.
