Evil Mad Scientist AxiDraw MiniKit 2, Инструкция по сборке

Страница: 73 / 75

6.1 Accessories
The AxiDraw MiniKit 2 comes with certain accessories: The
power supply, USB cable, and ruler that you’ve used by this
point, plus the pen clip, screws for mounting the pen clip,
the easel, and binder clips.
The pen clip is attached to the Z Slide of the AxiDraw by the
two little screws, and there is a thumbscrew for holding the
pen in place. Detailed instructions about the pen clip can
be found in the main AxiDraw User Guide, available at:
https://axidraw.com/guide
The easel comes as a bare piece of hardboard plus a packet
of rubber feet. Six rubber feet are included. Press four of
them at the corners of the hardboard, on the uglier or less-
flat side. (Two are provided as spare, should they ever be
needed.)
The binder clips can be used to attach print media (cards,
pieces of paper, etc) to the easel while in use.
Additional AxiDraw accessories are available at:
https://emsl.us/902
Compatible accessories include the XL pen clip, Italic pen
adapter, and Rigid End Effector.
73