Ever SINLINE PRO 10000, Инструкция по эксплуатации

Страница: 6 / 42

Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
6
The dedicated DPC system controls the operation of the power supply unit, and has
an extremely precise and rapidly acting system for detecting overloads and output
short-circuits during battery operation. In mains operation mode, short-circuit
protection is provided by fuses, with overloads being brought to the user's attention
both audibly and optically.
A special soft start mode has been introduced, which allows trouble-free start-up with
large loads that draw considerably start-up power, such as laser printers.
In addition, the DPC enables long-term battery operation of the power supply unit by
allowing the user to connect an additional battery pack and control the internal
temperature by means of an active cooling system, which is activated as required.
This method of cooling activation reduces the noise generated by the unit and helps
extend the life of fans.
The DPC system supports various methods of communication between the unit and
a PC over a communication link or a special link for the connection of an EVER
management card EVER (HTTP, telnet, SNMP).
The unit performs precise measurements of its basic parameters, including battery
voltage, power grid input voltage, unit output voltage, the power of connected loads,
temperature, and of advanced parameters, such as the available battery capacity or
backup mode operating time under current load.
The UPS utilises an innovative charging method, typically reserve for high-end power
supply units. which is known as CBC - COOL BATTERY CHARGING; this system
utilises elements of the internal converter for cold battery charging. In the mains
operating mode, this function charges the batteries, while in battery operation mode it
converts the internal energy of the battery to an alternating voltage that supplies the
protected devices.