Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
23
INSTALLATION OF THE POWER SUPPLY UNIT
The weight of the device should be considered when selecting the point of
installation. The unit should be used only in rooms where the levels of dustiness,
temperature and humidity are concordant with the device specifications. Appropriate
cooling conditions must be ensured for the unit to work correctly. For this reason, the
unit's ventilation openings must be uncovered at all times, while the distance
between the unit and other objects should not be less than 30 cm.
NOTE! It is forbidden to install the appliance in the vicinity of
flammable materials!
Detailed information has been given in a separate document containing installation
guidelines, provided with the product.
Before placing the power supply unit, you should install the two additional mounting
holders, which improve its stability and allow it to be screwed to the floor, if
necessary. To do this, loosen the 4 M8 screws located in the central bottom part of
the appliance. Tip the device slightly and slide in the holders. Next, screw the holders
to the device using the 4 M8 screws.
Figure 2: Mounting holders
BATTERY MODULE
Additional battery modules can be connected to the SINLINE PRO 10000 series
power supply units. The modules are attached to the connection terminals on the
rear panel of the unit. Adding additional battery packs extends the time of battery
mode operation. The battery modules are connected in a row, and are protected by
additional fuses located in their rear panels.
NOTE! In the event of a burnt out, the fusible cut-outs should be
replaced with new ones that are fully concordant with the
specification.
Содержание SINLINE PRO 10000
Страница 1: ......
