Ever SINLINE PRO 10000, Инструкция по эксплуатации

Страница: 22 / 42

Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
22
INSTALLATION
NOTE! Before installing the appliance, you must acquaint yourself
with the principles of industrial work safety set forward in the
previous chapter.
UNPACKING
Carry out a visual inspection of the power supply unit immediately upon delivery.
Although the product is packaged, the appliance could have undergone damage due
to inappropriate transport conditions. If any damage is determined, inform the carrier
or seller.
NOTE! The device may be delivered with connected batteries
The appliance is placed on a wooden pallet, which may be moved using a fork-lift
truck. In order to unpack the device, you should first cut through the bands attaching
it to the pallet. Next lift off the cardboard boxes. Remove the protective corners.
NOTE! The appliance does not stand directly on the pallet, but on
a layer of polyethylene foam, which impairs its stability. Falling of
the appliance may constitute a threat to health or life.
If the appliance is delivered with batteries, please note that it is very heavy – cf. the
table of technical parameters. Use belts and a hoist to remove the appliance from the
pallet.
If the device is delivered without batteries installed, it should be removed from the
pallet by at least 3 people.
Please check the contents of the package. The package should contain the following:
•
power supply unit,
•
PowerSoft Personal software on a CD disk,
•
RS232 communication cable for connecting the power supply unit to a PC,
•
USB communication cable for connecting the power supply unit to a PC,
•
set of fusible cut-outs type 10x38 (2 pieces)
•
instruction manual,
•
installation guidelines,
•
guarantee card,
•
mounting holders (2 pieces)