Ever SINLINE PRO 10000, Инструкция по эксплуатации

Страница: 26 / 42

Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
26
CONNECTING THE POWER SUPPLY UNIT
Connecting elements
Figure 4: Connecting elements with safeguards
F3 – safeguard of the service BYPASS line
F4 – primary line protection
WEJ AC – input terminals
L
B
– service BYPASS phase line
L – primary phase line
N – primary neutral line
WYJ AC – output terminals
L – output phase line
N – output neutral line
WEJ DC – input terminals of the external battery module
+ – positive pole
- – negative pole
F5 – safeguards of the terminal of the external battery module (fusible cut-
out)
- appliance protective earthing point, connection of a cable with an
eyehole connector by means of an M6 screw
The power supply unit is not provided with connection wires with sockets. Thus, it is
connected by screwing the ends of individual cables to the links. Next, the cables
should be protected against tearing out - to do this, fasten them with bands to the
special grips located beneath the connecting elements.
Cable diameters sizes should be concordant with the installation guidelines. The
cables should terminate in metal sleeves.