Ever SINLINE PRO 10000, Инструкция по эксплуатации

Страница: 21 / 42

Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
21
INDUSTRIAL WORK SAFETY INSTRUCTIONS
TRANSPORT
•
exercise particular care when transporting;
•
because of its weight, the device has been fitted with rubber wheels;
•
the appliance should be operated and stored in conditions concordant with those
set forward in the specification;
ELECTRICAL SAFETY
•
it is forbidden to work on one's own under conditions constituting a threat to life
and/or health;
•
during a momentary short-circuit, the high current may cause serious burns;
•
before connecting the appliance, it is necessary to check the technical condition
of cables, plugs and sockets, as well as that of the appliance itself;
•
insofar as possible, you should connect and disconnect communication cables
using one hand only, for in the event of touching two surfaces with different
electric potentials you may suffer an electric shock;
•
the device must be connected to a three-cable system (1P+N+PE) – failure to do
so will result in an increased risk of electric shock;
It is strictly forbidden for the user to perform any repair work, as this would constitute
a threat to health and/or life. All repairs and battery replacements must be carried out
exclusively by qualified service personnel.
NOTE! The UPS is completely disconnected from the power network
only when the power supply cord is disconnected.
NOTE! The device is equipped with an internal power source
(storage cells), and therefore a dangerous voltage may appear on
the output even if it is not connected to the mains.
NOTE! SINLINE PRO 10000 power supply units are not intended for
usage with medical life and/or health support systems.