Ever SINLINE PRO 10000, Инструкция по эксплуатации

Страница: 13 / 42

Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
13
CONTROL submenu
The CONTROL submenu is divided into three groups. The menu can be navigated in
the same way as described above. The user may alter the configuration of the power
supply
unit only if individual items can be changed
under specific conditions. Cf. table hereunder.
Table. 4 Table of control flag changes
Operation mode
Control flag
U
N
K
N
O
W
N
IN
IT
N
O
R
M
A
L
(M
A
IN
S
)
B
A
C
K
U
P
S
T
O
P
R
E
A
D
IN
E
S
S
S
T
A
N
D
B
Y
E
M
E
R
G
E
N
C
Y
AwaryjneWylaczenie X
● ● ● ● ● ●
X
UPS X X
○ ○ ● ■ ○
X
Buzzer
X
□ □ □ □ □ □ □
Czas.Wyl.EPO X
□ □ □ □ □ □ □
UPS->STB/STB->UPS X X X
●
X X X X
KasujAwarie X X X X X X X
●
TestAku X
□ □ □ □ □ □ □
Screens are selected using the
▲▼
keys, and confirmation given by pressing . As
in the case of parameters, selections are made using the ▲▼ keys and confirmation
given by pressing the key. Two types of parameters have been included in the
CONTROL submenu. Some of them require repeated confirmation of an intended
change (by pressing
) or resignation without changing (pressing the ESC key), e.g.
AwaryjneWylaczenie. The modification of others consists in the appropriate
placement of a flag by selecting On or Off by means of the
▲▼
keys and
confirmation by pressing . Confirmation is followed by automatic passage to
a screen one level higher in the tree structure.
Once confirmed, a parameter is save in the unit's memory. The saving process itself
is signalled by the following messages:
-- Trwa zapis -- - saving in progress
-- Zapis OK -- - saving successfully completed
-- Blad zapisu -- - saving was unsuccessful, please try again
-- Zla warto ść -- - a value outside the permitted range
The message appear briefly in the lower line of the screen, whereafter the system
automatically proceeds to a screen one level higher. This principle is used for all
modifiable parameters. An example of saving screens has been given hereunder.
X – change not allowed
● – only switch on
○
– only switch off
□ - switching
■ – only switch on; switch off
possible only when waiting for a
minimal load