Eurotherm 605 Series, Руководство по установке и инструкция к продукту

Страница: 59 / 221

The Operator Station
5-11
605 Series Frequency Inverter
Changing a Parameter Value
Refer back to “The Menu System Map” to see how
the menu is mapped.
Each menu contains parameters.
With the Parameter you want on view, press M to
begin editing.
The up (
∆∆∆∆
) and down (
∇ ∇ ∇ ∇
) keys will now change the
parameter/function value.
Press E to finish editing.
The four keys will once again navigate around the Menus . Refer back to “Navigating the Menu
System”, page 5-9.
What do the Symbols mean next to some Parameters?
Parameter Status Information → → → → ← ← ← ← =
→
→ →
→
Pressing M M M M in a parameter displays
→
→ →
→
on the left of the bottom line to indicate
that the up and down keys will now change parameter values. Pressing EEEE
removes the symbol and reverts the up and down keys to scrolling through the
parameters.
←
← ←
←
A writable parameter may be non-writable if it is the destination of a link. In this
case it will be indicated by
←
← ←
←
appearing on the left of the bottom line.
= = = =
Non-writable parameters are identified by
= = = =
appearing on the left of the
bottom line.
Note that some parameters become non-writable when the Inverter is running.
Expanded Menu Information >>
The parameters listed below are followed by >> to the right of the bottom display line indicating
that there is more information. Press the M key to display a further list of parameters.
AUTO RESTART menu at level 4: AR TRIGGERS 1
AR TRIGGERS 2
TRIPS STATUS menu at level 4 : DISABLED TRIPS
ACTIVE TRIPS
TRIP WARNINGS
OP STATION menu at level 4: ENABLED KEYS
increment
decrement
parameter
change
exit
parameter
change
EDITING PARAMETERS
E
M
enter