Eurotherm 605 Series, Руководство по установке и инструкция к продукту

Страница: 50 / 221

5-2
The Operator Station
605 Series Frequency Inverter
The MMI DIAGNOSTICS Menu
SPEED DEMAND Tag No. 255 xxx.xh%
Actual speed demand.
(Refer to reference )
REMOTE SETPOINT Tag No. 245
-300.00
-300.00 -300.00
-300.00 to
to to
to 300.00 %
300.00 % 300.00 %
300.00 %
Target remote reference used when ramping in remote reference mode.
(Refer to reference, page)
COMMS SETPOINT Tag No. 269
-300.00
-300.00 -300.00
-300.00 to
to to
to 300.00 %
300.00 % 300.00 %
300.00 %
Target reference used when ramping in remote reference Comms mode.
(Refer to reference, page)
LOCAL SETPOINT Tag No. 247
0.00
0.00 0.00
0.00 to
to to
to 100.00 %
100.00 % 100.00 %
100.00 %
The Operator Station setpoint.
(Refer to reference, page)
JOG SETPOINT Tag No. 246
0.00
0.00 0.00
0.00 to
to to
to 100.00 %
100.00 % 100.00 %
100.00 %
Target reference used when ramping in local or remote reference Jog mode.
(Refer to jog, page)
DRIVE FREQUENCY Tag No. 591 xxx.xHz
The Inverter output frequency.
(Refer to pattern gen, page)
ENCODER SPEED Tag No. 568 xxxx.xHz
Speed feedback in Hz.
(Refer to encoder, page)
ENCODER SPEED Tag No. 569 xxxxx n/min
Speed feedback in RPM
(Refer to encoder, page)
ENCODER SPEED Tag No. 749 xxx.xx%
Speed feedback as a percentage of MAXIMUM SPEED.
(Refer to encoder, page)
MOTOR CURRENT Tag No. 67 xxxx.xA
Level of rms line current being drawn from the Inverter.
(Refer to current feedback, page 6-Error! Bookmark not
defined.)
LOAD Tag No. 207 xxx.xx%
Normalised version of the I TORQUE diagnostic: 100% = motor operating at rated load
(torque).
(Refer to current feedback, page)
FIELD Tag No. 73 xxx.xh%
Normalised version of the MOTOR CURRENT diagnostic: 100% = motor operating at rated
magnetic flux (field).
(Refer to current feedback, page)
CURRENT LIMITING Tag No. 370 FALSE / TRUE
Indicates if current limit is active (altering Inverter output frequency).
(Refer to current limit, page)
BRAKING Tag No. 81 FALSE / TRUE
Indicates the state of the brake switch.
(Refer to dynamic braking, page)
DC LINK VOLTS Tag No. 75 xxxx.xV
The internal dc voltage being tested by the braking block.
(Refer to current feedback, page)
ACTIVE TRIPS Tag No. 4 0000 to FFFF
Indictes which trips are currently active.
(Refer to trips status, page)
FIRST TRIPS Tag No. 6 enumerated
Indictes the source of the first trip from when a trip occurs.
(Refer to trips status, page)