Eurotherm 605 Series, Руководство по установке и инструкция к продукту

Страница: 53 / 221

The Operator Station
5-5
605 Series Frequency Inverter
LED Indications
There are seven LEDs that indicate the status of the Inverter. Each LED is considered to operate
in three different ways:
The LEDs are labelled HEALTH, LOCAL (as SEQ
and REF), FWD, REV, RUN, and STOP.
Combinations of these LEDs have the following
meanings:
HEALTH HEALTH HEALTH HEALTH RUN RUN RUN RUN STOP STOP STOP STOP Inverter State Inverter State Inverter State Inverter State
Re-Configuration
Tripped
Stopped
Stopping
Running with zero reference
Running
Autotuning
FWD FWD FWD FWD REV REV REV REV Forward / Reverse State Forward / Reverse State Forward / Reverse State Forward / Reverse State
Requested direction and actual direction are forward
Requested direction and actual direction are reverse
Requested direction is forward but actual direction is reverse
Requested direction is reverse but actual direction is forward
LOCAL
LOCAL LOCAL
LOCAL
SEQ SEQ SEQ SEQ
LOCAL
LOCAL LOCAL
LOCAL
REF REF REF REF
Local / Remote Mode
Local / Remote Mode Local / Remote Mode
Local / Remote Mode
Start/Stop (Seq) and Speed Control (Ref) are controlled from the
terminals
Start/Stop (Seq) is controlled using the RUN, STOP, JOG and
FWD/REV keys. Speed Control (Ref) is controlled from the terminals
Start/Stop (Seq) is controlled from the terminals
Speed Control (Ref) is controlled using the up (
∆∆∆∆
) and down (
∇ ∇ ∇ ∇
) keys
Start/Stop (Seq) and Speed Control (Ref) are controlled using the
Operator Station keys
OFF
FLASH
ON